Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with vaporpresent!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Pioneer4you IPV V200 Box Mod by Yihi
Description
The IPV Pioneer Mod is a high quality 200W box mod brought to us by Yihi. It’s constructed from zinc alloy, anodized aluminum and ABS which provides an elegant and hard wearing design. Powered by the SX531 chipset, the IPV has a wattage range of between 5-200W and supports 2 x 18650 battery cells.
Features
- Water Resistance SX531 Chip
- Powered by Dual 18650 Battery Cells (Required Separately)
- Maximum 200W Output
- Customisable Flavour Settings
- Soft – Starts at a lower rate of 50% and slowly increases your power
- Normal – Starts at your exact wattage settings
- Power – Starts above your output settings and slowly brings them down
- 0.96 TFT Display
- Requires an External Battery Charger
- 30mm 510 Connector
- 5 Digit Puff Counter
- Side Battery Magnetic Doors
- Protection Modes
- Low Battery Protection
- Battery Over Charge Protection
- Time Ignition Limit protection
- Overheat Protection
- Short Circuit Protection
- Reverse Polarity Protection
- Constructed from Zinc Alloy, Anodized Aluminum & ABS
- Size: 90.6mm x 48mm
- Resistance Range: 0.1-1Ω
- Voltage: 6.4V-8.4V
- Quiescent Current: <100uA
Content
- 1 x IPV V200 Box Mod
- 1 x Type C USB Cable
- 1 x User Instructions
Available Options
Description
The IPV Pioneer Mod is a high quality 200W box mod brought to us by Yihi. It’s constructed from zinc alloy, anodized aluminum and ABS which provides an elegant and hard wearing design. Powered by the SX531 chipset, the IPV has a wattage range of between 5-200W and supports 2 x 18650 battery cells.
Features
- Water Resistance SX531 Chip
- Powered by Dual 18650 Battery Cells (Required Separately)
- Maximum 200W Output
- Customisable Flavour Settings
- Soft – Starts at a lower rate of 50% and slowly increases your power
- Normal – Starts at your exact wattage settings
- Power – Starts above your output settings and slowly brings them down
- 0.96 TFT Display
- Requires an External Battery Charger
- 30mm 510 Connector
- 5 Digit Puff Counter
- Side Battery Magnetic Doors
- Protection Modes
- Low Battery Protection
- Battery Over Charge Protection
- Time Ignition Limit protection
- Overheat Protection
- Short Circuit Protection
- Reverse Polarity Protection
- Constructed from Zinc Alloy, Anodized Aluminum & ABS
- Size: 90.6mm x 48mm
- Resistance Range: 0.1-1Ω
- Voltage: 6.4V-8.4V
- Quiescent Current: <100uA
Content
- 1 x IPV V200 Box Mod
- 1 x Type C USB Cable
- 1 x User Instructions
